一种含芴基的钌(II)配合物的合成及DNA键合性质

合成了一种新的钌(II)配合物[Ru(bpy)2(Hfip)](ClO4)2, 其中bpy代表2,2′-联吡啶, Hfip代表2-(9H-芴-2-基)-1H-咪唑-[4,5-f]-[1,10]-邻菲啰啉. 通过紫外可见光谱、荧光光谱、稳态荧光淬灭、与溴化乙锭的竞争实验、粘度测量和DNA热变性研究了该配合物与小牛胸腺DNA的键合性质. 结果表明, 该配合物能嵌入键合DNA, 键合常数Kb=8.6×105 L·mol-1 (50 mmol·L-1 NaCl).     

聚L-苏氨酸修饰电极对多巴胺和肾上腺素的电催化氧化

利用循环伏安法将L-苏氨酸聚合修饰在玻碳电极表面, 制成聚L-苏氨酸修饰电极. 实验表明, 该电极对多巴胺和肾上腺素都有较好的催化氧化效果. 运用循环伏安法详细研究了修饰电极的电化学性质. 在pH 2.5的磷酸盐缓冲溶液(PBS)中, 肾上腺素的电子传递系数为0.51, 表观反应速率常数为1.33 s-1; 在pH 7.5的PBS中, 多巴胺在电极上产生一对氧化还原峰, 多巴胺在电极上的电子传递系数为0.60, 表观反应速率常数为0.92 s-1. 该修饰电极对多巴胺和肾上腺素能够进行同时测定, 还原峰电流与多巴胺和肾上腺素浓度分别在1.0×10-6-5.0×10-4 mol·L-1和3.0×10-6-1.0×10-4 mol·L-1范围内呈现良好的线性关系.     

碳酸二甲酯法合成1,5-萘二氨基甲酸甲酯的反应机理

 应用红外光谱技术研究了在乙酸锌催化作用下1,5-萘二胺与碳酸二甲酯甲氧基羰基化反应机理. 结果表明,二水合乙酸锌只有失去两个结晶水变成无水乙酸锌后才能产生催化活性. 无水乙酸锌与1,5-萘二胺形成一个新的配位络合物,该配位络合物是一个适宜的亲核试剂,能与碳酸二甲酯进行亲核反应,生成1,5-萘二胺的甲氧基羰基化产物. 在无水乙酸锌与1,5-萘二胺形成配位络合物的过程中,无水乙酸锌的结构从双齿型转变成单齿型.     

碳纳米管表面修饰程度对碳纳米管载Pt电催化性能的影响

比较了用不同温度的浓HNO₃处理的碳纳米管(CNTs)作载体的Pt(Pt/CNTs)对甲醇氧化的电催化活性. 结果表明浓HNO₃处理使CNTs表面修饰上的含氧基团对CNTs上沉积Pt粒子的平均粒径有较大影响. 表面修饰程度适当时, 制得的Pt/CNTs中Pt粒子较小, 因此, 对甲醇氧化的电催化活性较高. 而表面修饰程度过大, 易使Pt粒子团聚, 从而降低Pt/CNTs催化剂对甲醇氧化的电化学活性.     

CO2选择性氧化甲烷制C2烃催化剂La2O3/ZnO的氧化还原和CO2吸附性能

Ｌａ２Ｏ３／ＺｎＯ催化剂体系在以二氧化碳作为氧化剂的甲烷氧化偶联反应中具有很高的Ｃ２烃选择性和稳定性．采用ＣＯ２－ＴＰＤ－ＭＳ和ＴＰＲ技术考察了Ｌａ２Ｏ３／ＺｎＯ对ＣＯ２的吸附性质及其氧化还原行为．结果表明：（１）Ｌａ２Ｏ３／ＺｎＯ催化剂体系存在着强、弱两种碱中心，其中弱碱中心数量随样品中Ｌａ２Ｏ３含量增加而减少，强碱中心强度随样品中Ｌａ２Ｏ３含量增加而增强．（２）由于组分相互作用，高温下，Ｌａ２Ｏ３／ＺｎＯ易产生晶格氧空位，使之对ＣＯ２的吸附增强，吸附后的ＣＯ２与晶格氧作用形成立方晶型Ｌａ２Ｏ２ＣＯ３．（３）Ｌａ２Ｏ３／ＺｎＯ表面的Ｌａ３＋和Ｚｎ２＋可以部分被还原，由于组分间的相互作用，使得二者的还原都较单一组分存在时更难．（４）Ｈ２－ＣＯ２－Ｈ２氧化还原循环实验表明，Ｌａ２Ｏ３／ＺｎＯ表面被部分还原后，ＣＯ２可以将部分被还原的表面再氧化．在此基础上对Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷与ＣＯ２转化为Ｃ２烃的机制也进行了讨论．     

New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.     

Electrochemical Behavior and Determination of Uric Acid at Single-Walled Carbon Nanotube Modified Gold Electrodes

The voltammetric behavior of uric acid was studied at a single-walled carbon nanotube (SWNT) modified gold electrode. Uric acid can effectively accumulate at this electrode and produce an anodic peak at about 0.45 V (vs. SCE) in pH 5.0 sodium acetate buffer solutions (HAc-NaAc). The experimental parameters, such as solution pH, accumulation time, and amount of SWNT, were optimized for determination. Under the optimum conditions, the anodic peak current is linear to the uric acid concentration over the range of 1.0×10⁻⁷ M to 2.5×10⁻⁵ M with a correlation coefficient of 0.998. The detection limit was 5.0×10⁻⁸ M for 60 s accumulation. The electrode could be easily regenerated and exhibited good stability. A 5.0×10⁻⁶ M uric acid solution was measured ten times using the same electrode, and the relative standard deviation of the peak current was 1.3%. This method was successfully applied to the determination of uric acid in human urine samples, and the recovery was 97–99%. The feasibility for simultaneous determination of xanthine, ascorbic acid and uric acid was discussed. These species did not interfere with each other in a certain concentration range. The influence of some surfactants on the anodic peak was also examined.     

Two New Steroidal Glycosides from Fermented Leaves of Agave americana

Two new spirostanol glycosides named agamenoside A and B, ere isolated from the fermented leaves of Agave americana. Their structures were elucidated as (23S,25R)-5α-spirostan-3β,6α，23－triol 3-O-α-L-rhamnopyranosyl-(1→3)-β-D-glucopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyranosyl-(1→4)-β-D-galactopyranoside(1) and (25R)-5α-spiro-stan-3β,6α-diol 3-O-β-D-glucopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyra-nosyl-(1→4)-β-D-galactopyranoside(2) by a combination of chemical and spectral methods.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.